Front Cover Inner Assembly; Removal; Installation - Epson EPL-N4000 Service Manual

EPSON EPL-N4000/EPL-N4000+ Optional Finisher Stapler

3.4.2 Front Cover Inner Assembly

Refer to the exploded diagram (Figure 4-25, "HCS Covers Front" on page 166).

3.4.2.1 Removal

1. Open Top Cover.
2. Open Front Cover Assembly.
3. Remove the screw securing Front Cover Inner Assembly to HCS frame.
4. Securing Unload While Run button pressed, lift Front Cover Inner
Assembly and remove it from HCS frame.
5. Remove Front Cover Assembly. (Refer to "Front Cover Assembly" on
page 40)

3.4.2.2 Installation

1. Install Front Cover Assembly. (Refer to "Front Cover Assembly" on
page 40)
2. Install Front Cover Inner Assembly to the body by inserting two tabs at
the bottom of Front Cover Inner Assembly into cutouts in HCS frame.
3. Securing Unload While Run button pressed, insert the top part of Front
Cover Inner Assembly to HCS frame.
4. Set Front Cover Inner Assembly as Unload While Run button can move
smoothly when pressed and unpressed.
5. Secure Front Cover Inner Assembly to HCS frame with a screw.
6. Close the Front Cover Assembly.
7. Close Top Cover.
Disassembly and Assembly Disassembly and Assembly
Unload While Run button
Front Cover Inner Assembly
Cutouts in HCS frame
Figure 3-6. Front Cover Inner Assembly
Revision A
41