Rear Cover; Removal; Installation; Harness Cover - Epson EPL-N4000 Service Manual

EPSON EPL-N4000/EPL-N4000+ Optional Finisher Stapler

3.4.7 Rear Cover

Refer to the exploded diagram (Figure 4-26, "HCS Covers Rear" on page 167).

3.4.7.1 Removal

1. Open the Top Cover.
2. Remove two screws securing Rear Cover to HCS frame.
3. Lift Cover and remove it from the frame.

3.4.7.2 Installation

1. Open the Top Cover.
2. Install the Cover by hanging two tabs under the top face on two cutouts of
HCS frame.
3. Secure Rear Cover to HCS frame with two screws.
Tabs
Figure 3-11. Rear Cover
Disassembly and Assembly

3.4.8 Harness Cover

Refer to the exploded diagram (Figure 4-26, "HCS Covers Rear" on page 167).
3.4.8.1 Removal
1. Remove three screws securing the Harness Cover to HCS frame.
2. Remove the cover.
3.4.8.2 Installation
1. Install Harness Cover as shown in the
2. Secure Harness Cover to HCS frame with three screws.
Disassembly and Assembly
Figure 3-12. Harness Cover
Revision A
46