Table of Contents
Advertisement
Safety Instructions
Read these instructions before using your Color Calibrator, and
save them for later reference. Follow all warnings and instructions
in this User's Guide .
Unplug the AC adapter before cleaning. Clean with a damp
cloth only. Do not spill liquid on the calibrator.
Do not place the calibrator on an unstable surface, or near a
radiator or heat source.
Do not insert objects into the sensor tip.
Use only the type of power source indicated on the AC
adapter's label.
Connect all equipment to properly grounded power outlets.
Avoid using outlets on the same circuit as photocopiers or air
control systems that regularly switch on and off.
Do not let the power cord become damaged or frayed.
If you use an extension cord with the AC adapter, make sure
the total ampere rating of the devices plugged into the
extension cord does not exceed the cord's ampere rating. Also,
make sure the total ampere rating of all devices plugged into
the wall outlet does not exceed the wall outlet's ampere rating.
Do not attempt to service the products yourself.
Unplug the AC adapter and refer servicing to qualified
service personnel under the following conditions:
If the power cord or plug is damaged; if liquid has entered the
AC adapter; if the AC adapter has been dropped or the cabinet
damaged; if the AC adapter does not operate normally or
exhibits a distinct change in performance. (Do not adjust
controls that are not covered by the operating instructions.)
2
Introduction
Advertisement
Table of Contents
