Unload While Run Switch; Removal; Installation - Epson EPL-N4000 Service Manual

EPSON EPL-N4000/EPL-N4000+ Optional Finisher Stapler

3.4.65 Unload While Run Switch

Refer to the exploded diagram (Figure 4-40, "Front Frame" on page 187).

3.4.65.1 Removal

1. Remove the Front Cover Inner Assembly. (Refer to "Front Cover Inner
Assembly" on page 41)
2. Remove the screw holding Switch Bracket to the HCS frame and remove
the Bracket.
3. Pull out J836 from the Switch.
4. Remove the screw holding the Switch to the Bracket and remove the
Switch.

3.4.65.2 Installation

1. Install the Unload While Run Switch to the Switch Bracket.
2. Secure the Switch to the Bracket.
3. Connect J836 to the Switch.
4. Install Bracket to the HCS frame and secure the Bracket to the frame with
a screw.
5. Install the Front Cover Inner Assembly. (Refer to "Front Cover Inner
Assembly" on page 41)
Disassembly and Assembly Disassembly and Assembly
Figure 3-74. Unload While Run Switch
Revision A
111