Front Tray Assembly - Canon NP6085 Service Manual

4. MECHANICAL SYSTEM
5. Adjusting the Position of the Pick-Up
Roller Releasing Solenoid
1) Place a sheet of copy paper on the paper deck
lifter, and turn ON the power switch.
2) When the lifter has stopped moving up, dis-
connect the power plug, and open the paper
deck tray cover.
3) Remove the paper deck cover (rear).
4) Install the solenoid so that the pick-up roller is
4.0 ±1 mm from the surface of the paper when
the plunger of the pick-up roller releasing
solenoid is pushed in.
Mount
Copy paper (single sheet)
Adjusting screw
Pick-up roller
release solenoid
Figure 4-323
4-38
COPYRIGHT © 1996 CANON INC.
Pick-up roller
4.0 1mm
C. Front Tray Assembly
Caution:
When handling the front tray, be sure to
hold it with your hands at its front and rear.
(Figure 4-341)
q You could deform the separation plate if you held
the plate when lifting the front tray.
CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 4-341
Separation plate
Figure 4-342