Canon NP6085 Service Manual page 250

3. OPERATIONS AND TIMING
Type of jam
Manual feed pick-
up stationary
Manual feed pick-
up delay
Manual feeding
pick-up stationary
Manual feed deliv-
ery stationary
Manual feed deliv-
ery stationary
Manual feed origi-
nal left behind
Reversal leading
edge skew move-
ment
Reversal original
left behind
Reversal pick-up
delay
Reversal pick-up
leading edge skew
movement
Reversal pick-up
stationary
Reversal delay
Reversal station-
ary
3-192
COPYRIGHT © 1996 CANON INC.
Sensor
S32 After the feeding motor (M8) has turned ON, the original
does not move past S32 after feeding 1000 mm or more
in terms of length.
S20 After the feeding motor (M8) has turned ON, S20 does
not detect an original after feeding 1000 mm or more in
terms of length.
S20 S20 detects an original for 750 mm or more in terms of
length.
S20 After the belt motor (M3) has turned ON, S20 does not
detect an original after feeding for 532 mm or more in
terms of length.
S19, S20 After S20 has detected an original, the original does not
move past S19 after feeding 'feeding direction length x
1.5' mm or more in terms of length.
S5 S5 detects an original after the belt motor (M3) has rotat-
ed counterclockwise.
S3, S4 After reversal has started, there is a difference of 10 mm
or more in terms of length between the original detection
timing of the S3 and that of S4.
S3 After reversal has started, paper exists over S3.
S3, S5 At reversal, S3 does not detect paper after feeding 163
mm from S5 in terms of length.
S3, S4 At reversal, there is a difference of 10 mm or more in
terms of length in the original detection timing of S3 and
that of S4.
S3 At reversal, the original does not leave S3 after feeding
'feeding direction length x 1.5' mm in terms of length.
S5 After the belt motor (M3) has turned ON, S5 does not
detect an original after feeding 115 mm in terms of length.
S5 S5 detects an original for 'feeding direction length x 1.5'
mm in terms of length.
Table 3-1006b (RDF)
Description
CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
Code
91
92
A1
A2
A3
A4
15
51
52
53
54
14
41