Canon NP6085 Service Manual page 396

5. Adjusting the Height of the Charging Wire
Charging wire
Primary
Pre-transfer
Transfer
Separation
Reference:
The height (position) of the primary and the
transfer charging assembly may be adjust-
ed by turning the screw found behind the
charging assembly. A full turn of the screw
changes the position of the charging wire
by about 0.7 mm.
COPYRIGHT © 1996 CANON INC.
Height of the charging wire (mm)
+
_
+
1.5
7.5
_
0
10
1
10 0.3
*1
+ +
_
_
+ +
0 0
14.7 14.7
_
_
0.3 0.3
Figure 4-530
CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
+
+ 1.5
_
7.5 _
0
10
1
10 0.2
*1: The opening of the separation charging
assembly is assembled with high precision.
Take care not to bend the shielding plate so
that the opening width will not increase or
decrease.
4. MECHANICAL SYSTEM
Range
1 mm
No adjusting
mechanism
2 mm
No adjusting
mechanism
4-75