Canon NP6085 Service Manual page 431

5. INSTALLATION
Step Work
5 To change the voltage rating of the
power supply from 208 to 240V for a
North American model, perform the
following; for 208V North American
model and other models, go to step
13.
Remove the fastons from the
heaters at the front and the rear
(total of 6).
6 Remove the two mounting screws,
and remove the heater guide from
the gear while taking care not to
damage the heater.
7 Remove the four mountings screws,
and remove the two heater support
plates.
5-6
COPYRIGHT © 1996 CANON INC.
Checks/remarks
Fastons
Front;
Rear;
Heater support plate
CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
Fastons
Screws
Heater support plate
Screw