Canon NP6085 Service Manual page 15

B. Computer Form Feeder-A2
Item
Original pick-up
Original reading
Light source
Type of original
Size of original
Size of copy paper
Copying mode
Copy count
Copy counter
Pick-up tray stacking
Original delivery tray
stacking
Original size detection
Auto paper selection
Auto ratio selection
AE
Power supply
Dimensions
Weight
Operating environment
* What is called 1P computer form refers to form paper not intended for duplication (e.g., carbon paper).
* What is called 2P or 3P computer form refers to form paper intended for duplication.
COPYRIGHT © 1996 CANON INC.
Specifications
Face down, automatic pick-up delivery (set with first
page first)
Fixed scanner, stream reading by original tractor
Halogen lamp (100V model, 80 V, 220 W)
Halogen lamp (200V model, 175 V, 250 W)
1P computer form *
• 50 to 80 g/m 2
Breadthwise: 203.2 to 381.0 mm (8 to 15 in)
Lengthwise: 203.2 to 304.8 mm (8 to 12 in)
A4, A4R, LTR, LTRR
One-sided copying, Two-sided copying
1 set only (no multiple copying)
Soft counter in copier's service mode
50 mm high (max.; equivalent of 500 sheets of 80 g/m
50 mm high (max.; equivalent of 500 sheets of 80 g/m
Breadthwise: automatic by position of tractor
Lengthwise: by input of holes in single page
Provided (for AB-configuration, either A4 or A4R; for
inch-configuration, from LTR or LTRR)
Provided (automatic from between 64% and 100%
based on sizes of original and copy; however, may be
varied manually in 1%-increments); See P1-8.
Provided (measurements taken of single page)
24 VDC (from copier)
AC power supply (for scanning lamp; from copier)
512 (W) X 195 (D) X 116 (H) mm,
20.2 (W) X 7.7 (D) X 4.6 (H) in
7.5 kg (16.5 lb; not including kit)
Same as copier
Specifications subject to change without notice.
CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
1. GENERAL INTRODUCTION
Remarks
2 paper) On multifeeder cover
2 paper)
See P1-8.
Applies to manual
also, i.e., between
64% and 100%
1-7