Canon NP6085 Service Manual page 437

5. INSTALLATION
Step Work
12 Remove the drum positioning block
(1 screw; you will be using the block
later).
Be sure to hold the nob when
turning the mounting screw on
the drum positioning block.
13 Remove the two drum unit fixing
screws (silver); then, hook fingers
on the shaded area (figure) of the
drum unit front plate, and remove
the drum unit to the front.
Check to make sure that the
duplexing unit has been slid out.
5-12
COPYRIGHT © 1996 CANON INC.
Checks/remarks
nob
Screw
CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
Drum positioning
block
Screw