Canon NP6085 Service Manual page 433

5. INSTALLATION
Step Work
13 Remove the screw from the front of
the fixing assembly upper cover,
and remove the fixing assembly
upper cover.
14 Lift the cleaning belt drive lever with
fingers several times to remove the
slack.
After checking to make sure that
the slack has been removed, install
the fixing assembly cover with a
screw.
15 Push the top of the fixing assembly,
and set the locking lever to notch 2
at the front and the rear.
16 Place the fixing assembly on its rail.
17 Install the fixing assembly stopper.
18 Install the fixing assembly cover.
19 Slide in the fixing assembly slowly
into the machine.
5-8
COPYRIGHT © 1996 CANON INC.
Checks/remarks
Screw
Cleaning belt drive lever
1st notch
2nd notch
Locking lever
Keep the front doors open, and move to the installation of
the photosensitive drum.
CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)