Canon NP6085 Service Manual page 366

12)Remove the E-ring @3 , and remove the bearing
@4 .
21 22
20
Figure 4-360
13)Remove the two screw @5 , and take off the
plate @6 . While lifting the feeding assembly,
move the duplexing pick-up paper guide @7 to
the left.
27
Figure 4-361
COPYRIGHT © 1996 CANON INC.
14)Remove the U-guide and the two E-rings @8
24
23
19
15)Remove the pick-up vertical path roller togeth-
25
26
CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
(front, rear) and the two bushings @9 (front,
rear) of the pick-up roller shaft assembly; then,
remove the U-guide plate #0 from the pick-up
roller shaft.
30
29
Figure 4-362
er with the shaft toward the front.
28
4-45