Canon NP6085 Service Manual page 184

3. OPERATIONS AND TIMING
7. Fixing Assembly Locking Mechanism
The fixing assembly is designed so that it may
be slid out to the front.
If a jam stops the operation and the fixing
assembly paper sensor (Q10) and the delivery
sensor (Q15), or Q10 and the paper reversing
assembly inlet sensor (Q11) detect the copy
paper at the same time, the fixing assembly lock-
ing solenoid (SL16) is powered so that the fixing
assembly cannot be removed.
This is to prevent tearing of the paper if it
straddles over the fixing assembly and the deliv-
ery assembly.
Advise the user to remove such a jam by
opening the delivery door.
Copy paper
Q15
Q11
3-126
COPYRIGHT © 1996 CANON INC.
Q10
Q7
Locked
Figure 3-440
CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
Fixing assembly (profile)
ON
SL16