Canon NP6085 Service Manual page 125

If leakage occurs and the HVOFF signal con-
tinues, however, the application of corona current
will not be resumed unless the cause of the over-
current is removed.
Caution:
Separation jams will be frequent if the
corona current output applied to the trans-
fer/separation charging assembly stops.
Since such a fault will not be indicated on
the control panel, check the mechanisms
involved if separation jams start to occur
frequently.
COPYRIGHT © 1996 CANON INC. CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
3. OPERATIONS AND TIMING
3-67