Cw/Ccw Rotation Roller - Canon NP6085 Service Manual

4. MECHANICAL SYSTEM
6) Remove the fixing motor. (p. 4-21)
7) Remove the fixing relay drive assembly. (p.4-28)
8) Remove the three mounting screws !0 , and
remove the fixing buffer drive assembly !1 .
10
Figure 4-248
Caution:
Be sure to mark the position with a scribe
before loosening the tension of the fixing
drive assembly.
Marking
Figure 4-249
4-30
COPYRIGHT © 1996 CANON INC.
10
11
L. CW/CCW Rotation Roller
1. Construction
2. Removing the CW/CCW Rotation Roller
1) Remove the rear right cover and the rear lower
left cover.
2) Remove the fixing motor. (p. 4-21)
3) Remove the fixing relay drive assembly. (p. 4-28)
4) Remove the E-ring q, and loosen the drive
belt w. Disconnect the two connectors e of
the clutch, and remove the four mounting
screws r; then, remove the CW/CCW rotation
roller drive assembly t.
4
5
4
2
CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 4-250
Figure 4-251
1
4
4