Canon NP6085 Service Manual page 411

4. MECHANICAL SYSTEM
13.Replacing the Fixing Cleaning Belt
a. Removing the Fixing Cleaning Belt
Cleaning belt
feeding shaft (left)
Cleaning belt take-up roller
Cleaning belt feeding roller
(left)
Figure 4-821
1) Open the front door, and slide out the fixing
assembly from the copier.
2) Remove the mounting screw, and remove the
fixing assembly upper cover.
3) Remove the two mounting screws q, and
open the cleaning belt unit.
Figure 4-822
4-90
COPYRIGHT © 1996 CANON INC.
Cleaning belt
feeding shaft (right)
Cleaning belt
feeding roller
Cleaning belt feeding roller
(right)
1
4) Remove the two mounting screws w, and
close the cleaning belt unit while keeping the
cleaning belt feeding roller (right) e opening in
the direction of the arrow.
2
5) Slide the cleaning belt roller r toward the rear,
and remove it from the bushing at the front;
then, remove it from the bushing at the rear.
CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
3
Figure 4-823
4
Figure 4-824
2