Fixing Motor Assembly; Drum/Developing Drive Assembly - Canon NP6085 Service Manual

E. Fixing Motor Assembly
1. Removing the Fixing Motor Assembly
1) Remove the rear upper left cover and the rear
lower left cover.
2) Disconnect the two connectors q, and remove
the four mounting screws w; then, remove the
fixing motor assembly e.
2
2
Figure 4-218
Reference:
When removing the fixing motor assembly
from the copier, lift it slightly while pulling it
off.
COPYRIGHT © 1996 CANON INC.
2 3
1 2
CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
F. Drum/Developing Drive
Assembly
1. Construction
Figure 4-219
2. Removing the Drum/Developing Assembly
1) Open the front door, and pull out the drum unit
from the copier. (p. 4-64)
2) Remove the rear upper left cover and the rear
upper right cover; then, remove the exhaust
fan. (p. 4-7)
3) Remove the drum motor assembly. (p. 4-7)
4) Remove the high-voltage cable from the har-
ness retainer of the drum/developing drive
assembly.
5) Remove the six mounting screws q, and remove
the drum/developing drive assembly w slowly
while detaching the drive belt from the gear.
1
2
Figure 4-220
4. MECHANICAL SYSTEM
1
1
4-21