Canon NP6085 Service Manual page 327

2. Removing the Scanner Cooling Fan 2 (FM10)
1) Remove the upper left cover.
2) Remove the two mounting screws q, and dis-
connect the connector w; then, remove the
scanner cooling fan e.
1
2
Figure 4-116
3. Removing the Scanner Cooling Fan 3 (FM11)
1) Remove the rear right cover.
2) Remove the rear upper cover.
3) Remove the two mounting screws q, and
push down the harness guide plate w.
4) Remove the two screws e, and disconnect
the connector r; then, remove the scanner
cooling fan 3 t.
3
1 2
Figure 4-117
COPYRIGHT © 1996 CANON INC.
1
3
5
4
1
3
CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. Removing the Fixing Cooling Fan (FM2),
Exhaust Fan (FM3), and Power Supply
Cooling Fan (FM6)
1) Remove the rear cover.
2) Remove the two mounting screws q, and dis-
connect the connector w; then, remove the fix-
ing cooling fan e.
3) Remove the two mounting screws r, and dis-
connect the connector t; then, remove the
exhaust fan y.
4) Remove the mounting screw u, and discon-
nect the connector; then, remove the power
supply cooling fan assembly o together with
the fan stay.
6 4
4
7
9
Figure 4-118
4. MECHANICAL SYSTEM
2 1 1
3
8 7 5
4-7