Table of Contents
Advertisement
Error Code
E583-8001/E583-8002 due to malfunction of the front/rear tray
auxiliary guides(Staple/Booklet Finisher_Y1)
For CE
[Symptom]
In the machines prior to the countermeasure cut-in serial number in factory described below E583-8001 or E583-8002 may occur.
- E583-8001 : Error in the Tray Auxiliary Guide Motor. The tray auxiliary guides don't come off the Front/Rear Tray Auxiliary Guide
HP Sensors when the Tray Auxiliary Guide Motor has been driven for 1 second.
- E583-8002 : Error in the Tray Auxiliary Guide Motor. The Front/Rear Tray Auxiliary Guide HP Sensors don't detect the tray
auxiliary guides when the Tray Auxiliary Guide Motor has been driven for 1 second.
[Cause]
Due to the following 2 operation failure of the front/rear tray auxiliary guide, the above-mentioned symptom occurs.
1) Operation failure of the front/rear tray auxiliary guide due to shift in engagement of the rack and the pinion [2] of the front/rear
tray auxiliary guide [1]
2) Operation failure of the front/rear tray auxiliary guide due to large clearance of the mount of the lower delivery roller [1]
dislocating the bushing [2] on the rear side.
[Service work]
If the above-mentioned symptom occurs, check whether the front/rear tray auxiliary guide operates normally.
If the front/rear tray auxiliary guide does not operate normally, prepare the washer (XD1-1106-235), modify the bushing of the
lower delivery roller and adjust the assembly of the front/rear tray auxiliary guide holder by following the procedures below.
However, in case of replacement by the new-type lower delivery roller, washer (XD1-1106-235) is not necessary.
40
Advertisement
Table of Contents
