Remote Monitoring Configuration; Rmon History Configuration; Rmon Event Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Cli Reference Manual

Remote Monitoring configuration

Remote Monitoring (RMON) allows you to monitor traffic flowing through the switch. The RMON MIB is described in
RFC 1757.
The following table describes the RMON Configuration commands.
Table 164 RMON commands
Command
show rmon

RMON history configuration

The following table describes the RMON History commands.
Table 165 RMON History commands
Command
rmon history <1-65535> interface-oid
<1-127 characters>
rmon history <1-65535> requested-
buckets <1-65535>
NOTE: The maximum number of buckets that can be granted is 50.
rmon history <1-65535> polling-
interval <1-3600>
rmon history <1-65535> owner <1-127
characters>
no rmon history <1-65535>
show rmon history

RMON event configuration

The following table describes the RMON Event commands.
Table 166 RMON Event commands
Command
rmon event <1-65535>
description <1-127 characters>
rmon event <1-65535> type
<log|trap|both>
Description
Displays the current RMON configuration.
Command mode: All
Description
Enter a text string to describe the event.
The description can have a maximum of 127 characters.
Command mode: Global configuration
Selects the type of notification provided for this event. For log events, an
entry is made in the log table and sent to the configured syslog host. For
trap events, an SNMP trap is sent to the management station.
Command mode: Global configuration
Description
Configures the interface MIB Object Identifier. The IFOID must
correspond to the standard interface OID, as follows:
1.3.6.1.2.1.2.2.1.1.x
The interface OID can have a maximum of 127 characters.
Command mode: Global configuration
Configures the requested number of buckets, which is the number
of discrete time intervals over which data is to be saved.
The range is from 1 to 65535. The default is 30.
Command mode: Global configuration
Configures the time interval over which the data is sampled for
each bucket.
The range is from 1 to 3600 seconds. The default value is 1800
seconds.
Command mode: Global configuration
Enter a text string that identifies the person or entity that uses this
history index.
The owner can have a maximum of 127 characters.
Command mode: Global configuration
Deletes the selected history group.
Command mode: Global configuration
Displays the current RMON History parameters.
Command mode: All
Configuration Commands 136