Remote Monitoring Configuration; Rmon History Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Reference Manual

Remote Monitoring configuration

Remote Monitoring (RMON) allows you to monitor traffic flowing through the switch. The RMON MIB is
described in RFC 1757.
The following table describes the basic RMON Configuration commands. The following sections provide
more detailed commands.
RMON commands
Table 166
Command
show rmon

RMON history configuration

The following table describes the RMON History commands.
RMON History commands
Table 167
Command
rmon history <1-65535>
interface-oid <1-127
characters>
rmon history <1-65535>
requested-buckets <1-65535>
rmon history <1-65535>
polling-interval <1-3600>
rmon history <1-65535> owner
<1-127 characters>
no rmon history <1-65535>
show rmon history
Description
Displays the current RMON configuration.
Command mode: All
Description
Configures the interface MIB Object Identifier. The IFOID must correspond
to the standard interface OID, as follows: 1.3.6.1.2.1.2.2.1.1.x
where x is the ifIndex (1-16, 18-21)
The interface OID can have a maximum of 127 characters.
Command mode: Global configuration
Configures the requested number of buckets, which is the number of
discrete time intervals over which data is to be saved.
The maximum number of buckets that can be granted is 50.
NOTE:
The range is from 1 to 65535. The default is 30.
Command mode: Global configuration
Configures the time interval over which the data is sampled for each
bucket.
The range is from 1 to 3600 seconds. The default value is 1800 seconds.
Command mode: Global configuration
Enter a text string that identifies the person or entity that uses this history
index.
The owner can have a maximum of 127 characters.
Command mode: Global configuration
Deletes the selected history group.
Command mode: Global configuration
Displays the current RMON History parameters.
Command mode: All
Configuration Commands
178