Power Off; About The Circuit Breaker - Xerox 4590 User Manual

Power off

About the circuit breaker

X er o x 4 5 90 EP S / 4110 EP S Us e r G ui d e
CAUTION: Switching off the power of the machine may cause
loss of data being processed.
1. Before turning the power off, make sure that all print jobs have
completely finished. Also, make sure that the Online indicator
is not lit.
KEY POINT: Never turn the power off while data is being received
or when jobs are being printed.
2. Open the power switch cover at the front of the machine and
press the power switch to the
KEY POINT: Power off processing is performed internally on the
machine for a while after the power switch is turned off. Therefore,
do not unplug the power cord from the power outlet immediately
after turning the power switch off.
NOTE: If you turn the power back on after turning it off, first make
sure that the display on the UI has gone out.
The machine is provided with a circuit breaker. The circuit breaker
is normally set to the On (|) position as shown in the figure below.
In the event of a current leakage, the breaker will automatically cut
off the power circuit to prevent any leakage or fire from occurring.
If the breaker is set to the Off (O) position, contact your Customer
Support Center as there might be some unusual conditions.
1 . P r od u c t o v e r v ie w
Off position.
1-13