Attach Front Door To Chassis - Cisco 8800 Series Hardware Installation Manual

Unpack and Install the Chassis
Figure 35: Top Hood for 8808 Chassis
Step 10
Secure the top hood with the cable management brackets by using four M4 x 6 mm pan-head Phillips screws.
Tighten each screw to 11.5 to 15 in-lb (1.3 to 1.7 N·m) of torque.
Step 11 Tighten the cable management brackets screws to 11.5 to 15 in-lb (1.3 to 1.7Nm) of torque after completing
the bottom cover, and top hood installation.

Attach Front Door to Chassis

Before you begin
Before you can attach the front door to the chassis, you must attach the cable management brackets, bottom
plate, and top hood onto the chassis.
Required tools and equipment:
• Phillips screwdriver with a torque capability (customer supplied)
• Door kit (8818-KIT, 8812-KIT, 8808-KIT)
Note The door kit is optional.
Hardware Installation Guide for Cisco 8800 Series Routers
Attach Front Door to Chassis
47