Displaying The Memory Configuration - HP Visualize J5000 - Workstation Owner's Manual

The Boot Console Interface
Displaying the Memory Configuration
Displaying the Memory Configuration
The following sample screen output uses the memory command to show
memory configurations both with and without errors.
To display the current memory configuration for you system, from the
Information Menu of the boot console interface, follow the directions in
"Accessing the Boot Console Interface" earlier in this chapter. Once you
are in the Boot Console Interface Main Menu, type the following at the
prompt and press
Enter
Main Menu: Enter command> information
This places you in the Information Menu. From here, type the following
at the prompt and press
Information Menu: Enter command> memory
The screen displays status and configuration information for the memory
DIMMs installed in you computer. For the J5000 and J7000 sections
below, the first listing below shows the memory information for a system
with incorrectly installed or configured memory modules, and the second
listing shows the information for a system that has memory modules
correctly installed and configured.
156
:
:
Enter
Chapter 8