Unmounting A Cd Using Sam - HP Visualize J5000 - Workstation Owner's Manual

Using Your CD Drive
Mounting and Unmounting a CD
• The
• Click on
• The
• The following screen message appears:
Now you can access the CD as you would any other mounted file system.

Unmounting a CD Using SAM

Use the following procedure to unmount a CD:
NOTE Before you unmount a CD, make sure that your working directory (the
directory you're currently "in") is not set to any directory on the CD—this
goes for all shell windows. If you attempt to unmount a file system when
one or more working directories are set somewhere in the file system
you're trying to unmount, you'll get an error message something like
this:
To avoid this error message, simply cd to some directory that is known to
not be in the file system you want to unmount; for example, the root
directory / or your home directory. Again, make sure you do this for all
shell windows.
1. Log in as root. If you need information on logging in or setting up a
2. In a terminal window, enter the following command:
100
Select a Disk to Add...
mass-storage devices. Highlight the CD device containing the CD you
want to mount.
.
OK
Add CD-ROM Disk
(the directory under which the CD's contents will appear in your
entire file system) and click on
/dev/CD, although you can mount it wherever you want. If the
directory you specify does not yet exist, SAM will create it for you.
Mounting file system...
cannot unmount /dev/CD: device busy
user account, see Using Your HP Workstation.
Return
sam
The System Administration Manager window opens, showing several
window opens with a list of unused
window opens. Enter the desired mount point
. A typical CD mount point is
OK
Chapter 4