HP Visualize J5000 - Workstation Owner's Manual page 92

Using Your CD Drive
Operating the CD Drive
Table 4-1 CD Drive Controls and Indicators
NOTE There is neither a volume control nor a headphone jack on the front of
the CD drive. To listen to an audio CD, use the headphone jack on the
rear panel, and control the sound volume via software called "xmcd" (for
details, see "Audio Control for the CD Drive" on page 95).
92
Control/Feature
Busy Indicator
Eject Button
Emergency Eject
Hole
CD Tray
Purpose
The Busy Indicator blinks during various operations
of the drive.
Press the Eject Button to open the disk tray to insert or
remove a disk. When the drive is in use, you must
press the eject button for more than one second to
open the disk tray.
By inserting the end of a straightened paperclip, you
can open the disk tray when the workstation is
powered down.
The CD Tray holds the CD. This CD drive does not
use a CD caddy.
Chapter 4