HP Visualize J5000 - Workstation Owner's Manual page 25

The illustration below shows the locations of the connectors on the
system unit's rear panel.
Figure 1-4 System Unit Rear Panel Connectors
Power Supply
Interlock screw
(Torx T-15)
RS-232
Narrow SE SCSI
Wide LVD SCSI
AC Power
(Auto-sensing)
The two T-15 thumbscrews in the upper corners of the rear panel are the
keys to opening the machine: removing these two screws allows the top
panel to be removed, which in turn allows the left and right side panels
to be removed.
NOTE The upper-left thumbscrew (as seen from the back) is interlocked with
the power supply: loosening that screw disengages the power,
minimizing the shock danger while servicing. Make sure the interlocked
screw is firmly tightened when closing the unit, or the power supply
might still be disengaged.
Chapter 1
{
I/O Slots
System Overview
System Unit Rear Panel Connectors
Thumbscrew
(T-15)
Security Tab
TOC/Interrupt
100Base-T
USB
Parallel
Audio:
Mic In
Headphones
Line out
Line in
Secondary
Graphics
Slot (Slot 4)
Primary
Graphics
Slot (Slot 7)
25