Displaying The Status Of The System I/O - HP Visualize J5000 - Workstation Owner's Manual

Displaying the Status of the System I/O

The I/O command lets you identify all built-in I/O devices and optional
I/O devices installed in the option slots. It is available in the Information
Menu.
To use the IO command from the Information Menu of the boot console,
type the following command at the prompt and press
Information about the built-in and optional I/O devices is displayed.
Information Menu: Enter command > io
I/O MODULE INFORMATION
Path Decimal
------------ ----------- --------------------- ---------- ---- ----
LAN 10/0/12/0
AUDIO 10/0/13/0
IDE 10/0/14/0
SUPERIO MISC 10/0/14/1
FLOPPY 10/0/14/1/0 Bridge Device
SERIAL_1 10/0/14/1/1 RS232 port
SERIAL_2 10/0/14/1/2 RS232 port
PARALLEL 10/0/14/1/3 Bridge Device
USB 10/0/14/2
SCSI 10/0/15/0
FWSCSI 10/0/15/1
GRAPHICS(1) 10/1/1/0
GRAPHICS(3) 10/1/3/0
Chapter 8
Information Menu: Enter command> IO
Type
Ethernet
Comm Device
IDE
Bridge Device
USB
SCSI
SCSI
Display
Display
The Boot Console Interface
Displaying the Status of the System I/O
Enter
Location HVER SVER
built-in 03b0 a200
built-in
built-in 0040 a300
built-in
built-in
built-in 03b0 8c00
built-in 03b0 8c00
built-in
built-in 0040 a900
built-in 03b0 a300
built-in 03b0 a300
slot 1 0040 8500
slot 3 0040 8500
:
IODC IODC
Vers Dep
---- ----
0x02 0x00
0x00 0x00
0x01 0x00
0x01 0x00
0x00 0x00
0x00 0x00
0x00 0x00
0x01 0x00
0x01 0x00
161