Displaying The Current Memory Configuration - HP Visualize c3700 Owner's Manual

Displaying the Current Memory
Configuration
The following sample screen output uses the memory command to show a
memory configuration table with properly-installed and configured
memory.
To display the current memory configuration for your system, from the
Information Menu of the boot console interface, follow the directions in
"Accessing the Boot Console Interface" earlier in this chapter. Once you
are in the Boot Console Interface Main Menu, type the following at the
prompt and press
Enter
Main Menu: Enter command> information
This places you in the Information Menu. From here, type the following
at the prompt and press
Information Menu: Enter command> memory
The screen displays status and configuration information for the memory
DIMMs installed in your workstation. See the section "Memory
Information Sample."
Chapter 5
Displaying the Current Memory Configuration
:
:
Enter
The Boot Console Interface
173