HP Visualize J5000 - Workstation Owner's Manual page 143

A message similar to the following will be displayed:
Main Menu: Enter command > search
Searching for potential boot device(s)...
This may take several minutes.
To discontinue search, press any key (termination may not be immediate).
Path Number
-----------
P0
P1
P2
Search terminated.
At the prompt, you might type the following and press Enter:
Note that the operating system on the specified device (P1) is used to
boot your computer (also see the section "Searching for Bootable
Media").
• If you wish to interact with the Initial System Loader (ISL) before
booting you computer, follow the directions in "Accessing the Boot
Console Interface" earlier in this chapter, and then type the following
at the prompt:
The following prompt will appear:
Answering yes (Y) causes the ISL to be loaded from the specified
device. After a short time, the following prompt appears on your
screen:
ISL is the program that actually controls the loading of the operating
system. By interacting with ISL, you can choose to load an alternate
version of the HP-UX operating system. To interact with the ISL, you
must enter no (N).
For example, if the usual kernel (/stand/vmunix) on your root disk
(fwscsi.6.0) has become corrupted, and you wish to boot your
Chapter 8
Device Path
-----------------
LAN.15.11.162.224.3.254
LAN.15.11.160.173.3.254
LAN.15.11.160.154.3.254
Main Menu: Enter command > boot P1
Main Menu: Enter command > boot device
Interact with ISL (Y,N,Q)>
ISL>
The Boot Console Interface
Booting your Computer
Device Type
-----------
15.11.162.224 100/Half Dx
15.11.160.173 100/Half Dx
15.11.160.154 100/Half Dx
143