Configuring The Floppy Driver; Ordering Information - HP Visualize J5000 - Workstation Owner's Manual

Using Your 3.5-Inch Floppy Disk Drive
Operating the Floppy Drive
For more information on using you floppy disk drive and floppy diskettes,
refer to the floppy man page by typing the following in a terminal
window at the prompt and pressing
man floppy
For more information on using the mediainit command, refer to the
mediainit man page by typing the following in a terminal window at the
prompt and press
Enter
man mediainit
Configuring the Floppy Driver
If you reload software or rebuild the Instant Ignition system on your
computer, you need to reconfigure the HP-UX kernel to add the floppy
disk driver. Use the SAM utility to add the sioflop and siofdc flexible
disk drivers and build a new HP-UX kernel.
For more information about how to reconfigure the kernel using SAM,
see the following manuals:
• Managing Systems and Workgroups
• Using HP-UX

Ordering Information

To order Hewlett-Packard micro flexible diskettes for use in your 3.5-inch
floppy disk drive, use the following order number:
HP-92192X High-Density Micro Flexible Disks (1.44MB Formatted
Capacity) – box of ten diskettes.
122
:
Enter
:
Chapter 6