HP Visualize J5000 - Workstation Owner's Manual page 178

Troubleshooting
Running System Verification Tests
A terminal window opens.
2. Move the mouse cursor into the terminal window and click the left
mouse button.
3. Type the following at the shell prompt and press
cstm
The following is displayed on the screen:
Support Tool Manager
Type 'help' for a list of available commands.
CSTM>
At the CSTM> prompt, you can enter several commands. To see what
commands are available, type the help command.
4. To verify the system operation, type the following at the CSTM>
prompt and press
CSTM> verify all
Messages similar to the following appear:
Verification has started on device (CPU)
Verification has started on device (FPU)
CSTM>Verification of (FPU) has completed.
CSTM>Verification of (CPU) has completed.
5. Press to return to the CSTM> prompt after all test results are
Enter
reported.
6. Exit the Support Tools Manager by typing the following at the CSTM>
prompt and pressing
CSTM> exit
If any tests failed, further diagnosis is necessary by qualified service
personnel. You should contact your designated service representative.
178
Version A.01.00
:
Enter
:
Enter
:
Enter
Chapter 9