HP Visualize J5000 - Workstation Owner's Manual page 116

Using Your 3.5-Inch Floppy Disk Drive
The instructions in this chapter assume you are using the Workstation
Additional Core Enhancements for HP-UX 10.20 (June 1999) bundles,
and the HP CDE interface.
When examples of user input are given in this chapter, enter them at the
NOTE
command-line prompt in an HP CDE terminal window or HP-UX shell.
Some procedures in this chapter require you to log in as superuser
(root). If you cannot log in as root, contact your system administrator.
To install your floppy disk drive into your computer, the procedure is
very similar to that of installing a DDS tape drive (see Chapter 5 ,
"Using Your Digital Data Storage (DDS) Tape Drive," on page 103.
Note that there is physically not room enough to have both a floppy disk
drive and a DDS tape drive in the machine simultaneously.
116 Chapter 6