Displaying And Setting Paths - HP Visualize J5000 - Workstation Owner's Manual

Displaying and Setting Paths

A path is the hardware address of a device that is attached to the I/O
system of your computer. The path command sets the system paths
shown in the table below.
The path command sets and displays the hardware address of a specified
device attached to the I/O bus of your computer.
Table 8-1 System Paths
To display the current settings for the system paths, type the following at
the prompt and press Enter:
The paths are displayed in Mnemonic Style Notation, as shown below.
Table 8-2 Mnemonic Style Notation for Boot Paths
Chapter 8
Path Type
primary or pri
alternate or alt
console or con
keyboard or key
Main Menu: Enter command> path
I/O Type
Built-in LVD SCSI
Built-in SCSI
Built-in LAN
Displaying and Setting Paths
Device
Your computer's default boot device (usually the
root disk)
Your computer's alternate boot device (often a
CD drive)
Your computer's primary display device
Your computer's primary input ASCII device
Specification Format
fwscsi.scsi_address.logical_unit_number
scsi.scsi_address.logical_unit_number
lan.server_address.init_timeout.io_timeout
The Boot Console Interface
147