Displaying The Current Memory Configuration - HP Visualize J5000 Supplementary Manual

Boot Console Handler
Displaying the Current Memory Configuration
Displaying the Current Memory Configuration
The following sample screen output uses the memory command to show a memory
configuration table with properly-installed and configured memory.
To display the current memory configuration for a workstation, first follow the directions
in "Accessing the Boot Console Handler" on page 150. Once you are in the Boot Console
Handler's Main Menu, type the following:
Main Menu: Enter command > information [Enter]
This places you in the Information Menu. From here, type the following:
Information Menu: Enter command > memory [Enter]
The screen displays status and configuration information for the memory DIMMs installed
in the workstation. The following sample shows the memory information when memory
DIMMs are properly installed and configured.
MEMORY INFORMATION
MEMORY STATUS TABLE
Slot Size
---- ------
0 256MB
1 256MB
2 256MB
TOTAL MEMORY = 768MB
MEMORY FAULT TABLE
Slot Size
---- ------
Active, Installed Memory
Deallocated Pages
Available Memory
Good Memory Required by OS
Memory
HVERSION
-------- ----------
0x0860
166
Status
-------------
Active
Active
Active
Status
-------------
SVERSION
0x0900
: 768MB of SDRAM
: 0 Pages
-----------
: 768MB
: 0 (Not Initialized)
Chapter 5