Displaying The Current Memory Configuration - HP Visualize c3650 Supplementary Manual

boot console handler
displaying the current memory configuration
displaying the current memory configuration
The following sample screen output uses the memory command to show a memory
configuration table with properly-installed and configured memory.
To display the current memory configuration for you system, from the Information Menu of
the boot console handler, follow the directions in "accessing the boot console handler" on
page 158. Once you are in the Boot Console Handler Main Menu, type the following at the
prompt and press :
Enter
Main Menu: Enter command> information
This places you in the Information Menu. From here, type the following at the prompt and
press :
Enter
Information Menu: Enter command> memory
The screen displays status and configuration information for the memory DIMMs installed
in the workstation. See the section, "memory information sample" on page 176
Chapter 6 175