Displaying The Current Memory Configuration - HP j6700 - Workstation Service Handbook

Boot Console Handler
Displaying the Current Memory Configuration
Displaying the Current Memory Configuration
The following sample screen output uses the memory command to show a memory
configuration table with properly-installed and configured memory.
To display the current memory configuration for a workstation, first follow the directions
in the section "Accessing the Boot Console Handler" found in this chapter. Once you are in
the Boot Console Handler's Main Menu, type the following:
Main Menu: Enter command > information [Enter]
This places you in the Information Menu. From here, type the following:
Information Menu: Enter command > memory [Enter]
The screen displays status and configuration information for the memory DIMMs installed
in the workstation. The following sample shows the memory information when memory
DIMMs are properly installed and configured.
MEMORY INFORMATION
MEMORY STATUS TABLE
Slot Size (A)
---- ------
0a/0b 512MB
1a/1b 512MB
2a/2b 512MB
3a/3b 512MB
4a/4b
5a/5b 512MB
6a/6b 512MB
7a/7b 512MB
TOTAL MEMORY = 8192MB
MEMORY FAULT TABLE
Slot Size
---- ------
120
Status (A)
-------------
Active
Active
Active
Active
512MB Active
Active
Active
Active
Status
-------------
Size (B) Status (B)
-------- ----------
512MB Active
512MB Active
512MB Active
512MB Active
512MB Active
512MB Active
512MB Active
512MB Active
Chapter 5