HP Visualize J5000 - Workstation Owner's Manual page 66

Changing Your Computer's Hardware Configuration
DDS Drive Installation
Figure 2-19 Removing the DDS/Floppy Drive Bracket
4. Install the DDS drive into the bracket: the drive itself must be
inserted into the DDS drive bracket, and secured by four Torx T-10
screws (two on each side).
Figure 2-20 The DDS Drive Installed Into the DDS/Floppy Drive Bracket
5. Connect the power and ribbon cables to the DDS drive.
6. Slide the bracket, now containing the DDS drive, into the DDS drive
bay.
66 Chapter 2