Memory Information Examples: 16-Slot J7000
The following sample shows the memory-analysis display when memory
modules are not properly installed and configured. In this sample, the
DIMM in Slot 4A is of a different size than the DIMM in Slot 4B (they
must be equal in size). Also, there is a DIMM in Slot 5A, but none in Slot
5B (they must be added in pairs). This information is shown in the
Memory Fault table in the display below.
MEMORY INFORMATION
MEMORY STATUS TABLE
Slots
Size(A)
Status(A)
-----
-------
-------------
0a/0b
512MB
Active
1a/1b
512MB
Active
2a/2b
512MB
Active
3a/3b
512MB
Active
4a/4b
256MB
Mismatch
5a/5b
256MB
Mismatch
TOTAL MEMORY = 5120MB
MEMORY FAULT TABLE
Slots
Size(A)
Status(A)
-----
-------
-------------
4a/4b
256MB
Mismatch
5a/5b
256MB
Mismatch
Active, Installed Memory
Deallocated Pages
Available Memory
Good Memory Required by OS
Memory
HVERSION
SVERSION
-------- ----------
0x0890
0x0900
Chapter 8
The Boot Console Interface
Displaying the Memory Configuration
Size(B)
Status(B)
-------
-------------
512MB
Active
512MB
Active
512MB
Active
512MB
Active
512MB
Mismatch
-
Mismatch
Size(B)
Status(B)
-------
-------------
512MB
Mismatch
-
Mismatch
: 4096MB of SDRAM
: 0 Pages
-----------
: 4096MB
:
0 (Not Initialized)
159
Need help?
Do you have a question about the Visualize J5000 - Workstation and is the answer not in the manual?
Questions and answers