Turning On The Power - HP Visualize J5000 - Workstation Owner's Manual

Turning on the Power

1. Turn on the monitor and any external peripherals (for example,
2. Turn on the workstation. The workstation will run a series of
3. After two or three minutes, a series of messages are displayed as
4. A series of windows appears requesting the information you gathered
You should enter the host name when requested; otherwise, you will get
NOTE
an error message when you log in.
If you do not have other pieces of information, press Enter to use the
default value. You can provide missing information later by logging into
a terminal emulator window as superuser and executing this command:
5. The next question asks if you want to set a root password. The root
6. When you have finished answering all of the questions, the
7. Log into your first CDE session as root. For information on logging
Chapter 1
printers) connected to the workstation.
self-tests.
various hardware and software subsystems are activated. Unless
something is wrong with your system, you are not asked to respond to
these messages.
in the previous section, such as your host name, IP address, and time
zone. Enter the information as it is requested.
/sbin/set_parms
password is the password used for the account of the "superuser"—a
special user who has permission to perform all system administration
tasks. The username for the superuser is root.
workstation completes its start-up sequence and displays the CDE
login screen.
into CDE, see the Common Desktop Environment User's Guide.
System Overview
Powering Up Your System
35