Displaying The Current Memory Configuration - HP Visualize c160 Owner's Manual

D_boot_cons.doc 184 Tue Jul 2 10:44:54 1996
The Boot Console Interface
Displaying the Current Memory Configuration
Displaying the Current Memory Configuration
The following sample screen output using the memory command shows:
first, a memory configuration table with properly-installed and configured
memory (Sample Output 1); and second, output when a SIMM has been
improperly installed (Sample Output 2).
To display the current memory configuration for your system, from the
Information Menu of the boot console interface, follow the directions in
"Accessing the Boot Console Interface" earlier in this appendix. Once you
are in the Boot Console Interface Main Menu, type:
Main Menu: Enter command >
This places you in the Information Menu. From here type:
Information Menu: Enter command >
The screen displays status and configuration information for the memory
DIMMs installed in your workstation. The first listing below shows the
memory information for a system with correctly installed and configured
memory modules. The second listing shows the information for a system
that has memory modules incorrectly installed of configured.
184
information
memory