Installing The Bmc Management Cable - Dell PowerEdge C8000 Hardware Owner's Manual

7 Disconnect the BMC management cable from the system board and node
power distribution board. See Figure 3-78.
Figure 3-78. Removing and Installing the BMC Management Cable
1 management cable on system board

Installing the BMC Management Cable

CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Locate the LAN passthrough connector on the node power distribution
board. See "Node Power Distribution Board Connectors" on page 287.
2 Locate the consolidated BMC cable connector on the system board. See
"System Board Connectors" on page 279.
2 management cable on node power
distribution board
Installing System Components
245