Installing a Sled Blank
Hold the blank with the guide rail facing forward. Slide the blank into the
enclosure until it is fully seated and the release latches in place. See
Figure 3-7.
Hard-Drive
The information in this section include replacement procedures for the
following:
•
Front-Access Hard-Drives
•
Hard-Drive Cage Hard-Drives
•
Internal Hard-Drives
Hard-Drive Locations
The following illustrations show the location of the hard-drives in the sled.
Figure 3-8. Front-Access 2.5-inch Hot-Plug Hard-Drives
Installing System Components
143