Installing The Raid Battery - Dell PowerEdge C8000 Hardware Owner's Manual

Figure 3-33. Removing and Installing the RAID Battery
1 screws (3)
3 RAID battery

Installing the RAID Battery

CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Place the RAID battery into the hard-drive LED board assembly. See
Figure 3-33.
2 Replace the three screws securing the RAID battery. See Figure 3-33.
3 Replace the hard-drive LED board assembly. See "Installing the Hard-
Drive LED Board Assembly" on page 174.
4 If necessary, connect the RAID battery cable to the RAID battery.
5 Close the sled. See "Installing the Front and Back Sled Covers" on
page 165.
6 Replace the sled. See "Installing a Sled" on page 142.
1
3
2 bracket
Installing System Components
2
177