Dell PowerEdge C8000 Hardware Owner's Manual page 155

1 Remove the sled from the enclosure. See "Removing a Sled" on page 141.
2 Open the sled. See "Removing the Front and Back Sled Covers" on
page 161 or "Removing the Sled Cover" on page 166.
3 Loosen the thumbscrew securing the hard-drive carrier to the hard-drive
bracket. See Figure 3-18.
4 Slide and lift the hard-drive carrier out of the sled tray. See Figure 3-18.
Figure 3-18. Removing and Installing a Hard-Drive Carrier Located on the Sled Tray
1 thumbscrew 2 hard-drive carrier
Installing System Components
155