Figure 3-75. Removing and Installing the SD Card Reader
1
SD card reader cable
3
SD card slot
5
SD card reader connector
Installing the SD Card Reader
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Place the SD card reader on the SD card reader support bracket. See
Figure 3-75.
2 Replace the two screws securing the SD card reader. See Figure 3-75.
3 Connect the SD card reader cable to the SD card reader. See Figure 3-75.
4 If applicable, install the SD card. Hold the SD card with the label side
facing to the right and press the card into the slot to lock into place. See
Figure 3-74.
2
screws (2)
4
SD card reader
Installing System Components
239