Installing The Nvidia Tesla M2090 Gpgpu Card; Gpgpu Card Risers; Removing The Front Gpgpu Card Riser - Dell PowerEdge C8000 Hardware Owner's Manual

1 NVIDIA Tesla M2090 GPGPU card
3 mounting brackets (2)

Installing the NVIDIA Tesla M2090 GPGPU Card

CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Align the mounting brackets with the screw holes on the GPGPU card. See
Figure 3-49.
2 Replace the four screws securing the two mounting brackets. See
Figure 3-49.
3 Connect the emergency throttling cable to the GPGPU card. See
Figure 3-49.
4 Replace the GPGPU card assembly. See "Installing the Front GPGPU Card
Assembly" on page 193 or "Installing the Back GPGPU Card Assembly" on
page 200.
5 Close the sled. See "Installing the Sled Cover" on page 168.
6 Replace the sled. See "Installing a Sled" on page 142.

GPGPU Card Risers

Removing the Front GPGPU Card Riser

CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Remove the sled from the enclosure. See "Removing a Sled" on page 141.
2 Remove the front GPGPU card assembly. See "Removing the Front
GPGPU Card Assembly" on page 188.
202
Installing System Components
Many repairs may only be done by a certified service technician. You
Many repairs may only be done by a certified service technician. You
2 screws (4)
4 emergency throttling cable