Removing the NVIDIA Tesla M2090 GPGPU Card
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
The installation and removal procedures for the front and back GPGPU cards
are similar.
1 Remove the GPGPU card assembly. See "Removing the Front GPGPU
Card Assembly" on page 188 or "Removing the Back GPGPU Card
Assembly" on page 194.
2 Disconnect the emergency throttling cable from the GPGPU card. See
Figure 3-49.
3 Remove the four screws securing the mounting brackets. See Figure 3-49.
4 Lift the mounting brackets from the GPGPU card. See Figure 3-49.
5 Press down the cable-locking tabs and disconnect the power cables from
the back GPGPU card.
Figure 3-49. Removing and Installing the NVIDIA Tesla M2090 GPGPU Card
Installing System Components
201