Installing The Hard-Drive Tray - Dell PowerEdge C8000 Hardware Owner's Manual

Installing the Hard-Drive Tray

CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Insert the sled tray's standoff holes into the sled tray standoffs. See
Figure 3-20.
2 Replace the two screws securing the hard-drive tray. See Figure 3-20.
3 Replace the hard-drives. See "Installing a Hard-Drive Carrier on the Sled
Tray" on page 156.
4 Close the sled. See "Installing the Front and Back Sled Covers" on
page 165 or "Installing the Sled Cover" on page 168.
5 Replace the sled. See "Installing a Sled" on page 142.
Installing System Components
159