Installing The System Board - Dell PowerEdge C8000 Hardware Owner's Manual

Figure 3-84. Removing the System Board
1 screws (6)

Installing the System Board

CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Unpack the new system board.
2 Holding the system board by the edges, slide the system board into the
sled tray. See Figure 3-84.
3 Replace the six screws securing the system board to the sled tray. See
Figure 3-84.
4 Connect all cables to the system board. See Figure 3-83.
5 You must route the cables properly on the sled tray to prevent them from
being pinched or crimped.
256
Installing System Components
1
Many repairs may only be done by a certified service technician. You
2
2 system board